Proline Prosonic Flow 92F
Ultrasonic flowmeter

Picture of ultrasonic flowmeter Proline Prosonic Flow 92F for the chemical & petrochemical industry ©Endress+Hauser

Proline Prosonic Flow 92F - Ideally suited for the chemical and petrochemical industries

The Ultrasonic Flow Measuring Principle

Highly accurate, loop-powered flowmeter with innovative parallel path design for minimum inlet runs

Prosonic Flow F is the inline sensor with rugged industrial design for Ultrasonic fluid measurement. Combined with the loop-powered Prosonic Flow 92 transmitter, the device offers easy system integration and accuracy at an attractive price. Prosonic Flow 92F is ideally suited for the chemical and petrochemical industries.

This product is not available in this market.

  • Benefits

    • Safe design for process industries – international hazardous area approvals

    • No additional pressure loss – full-bore design

    • Process transparency – diagnostic capability

    • Easy installation and reduced installation costs – loop-powered transmitter

    • Fully...

  • Field of application

    • The measuring principle is independent of pressure, density, temperature, conductivity and viscosity

    • Inline device for homogeneous conductive and non-conductive liquids in the chemical and petrochemical industry

    Device properties:

    • Full compliance...

Features and specifications

Back

Details

  • Measuring principle

    Ultrasonic flow

  • Product headline

    The higly accurate, loop-powered flowmeter with innovative parallel path design for minimum inlet runs. Inline device for homogeneous conductive and non-conductive liquids in the chemical and petrochemical industry.

  • Sensor features

    Safe design for process industries – international hazardous area approvals. No additional pressure loss – full bore design. Process transparency – diagnostic capability. Full compliance according to NACE MR0175 and MR0103. Nominal diameter: DN 25 to 300 (1 to 12").

  • Transmitter features

    Easy installation and reduced installation costs – loop-powered transmitter. Fully industry compliant – IEC/ATEX/FM/CSA/TIIS/ NEPSI. Automatic recovery of data for servicing. Device in compact or remote version. 2-line backlit display with push buttons.

  • Nominal diameter range

    2 path version: DN80 to 300 (3 to12")
    3 path version: DN25 to 50 (1 to 2")
    4 path version: DN 80 to 300 (3 to 12")

  • Wetted materials

    Sensor:
    A351-CF3M (DN25 to 100)
    1.4404/TP316/TP316L or A106 GrB (DN150 to 300)
    Transducer: 1.4404/316/316L
    Flanges : 1.4404/316/316L or A105/1.0432

  • Measured variables

    Volume flow, calculated mass flow, sound velocity, flow velocity, signal strength

  • Max. measurement error

    Volume flow (standard):
    - ±0.5 % o.r. for 0.5 to 10 m/s (1.6 to 33 ft/s)
    Volume flow (option):
    - ±0.3 % o.r. for 0.5 to 10 m/s (1.6 to 33 ft/s)

  • Measuring range

    0.5 to 10 m/s (1.6 to 33 ft/s)

  • Max. process pressure

    PN 40 / ASME Cl. 300 / JIS 20K

  • Medium temperature range

    -40 to +150 °C (-40 to +302 °F)
    -40 to +200 °C (-40 to +392 °F) optional

  • Ambient temperature range

    -40 to +60 °C (-40 to +140 °F) compact
    -40 to +80 °C (-40 to +176 °F) remote sensor
    -40 to +60 °C (-40 to +140 °F) remote transmitter

  • Transmitter housing material

    AlSi10Mg, coated

  • Degree of protection

    IP67, type 4X enclosure
    IP68 type 6P enclosure (option for remote)

  • Display/Operation

    2 lines backlit display with 3 push buttons

  • Outputs

    1x 4-20 mA HART
    1x Pulse/frequency/switch output (passive)

  • Inputs

    N/A

  • Digital communication

    HART, Profibus PA, FOUNDATION Fieldbus

  • Power supply

    2 wire loop powered

  • Hazardous area approvals

    ATEX,FM, CSA, JPN

  • Other approvals and certificates

    3.1 material (wetted parts), calibration performed on accredited
    calibration facilities (acc. to ISO/IEC 17025), CRN, AD2000
    PED, EAC marking

  • Product safety

    EAC marking

  • Metrological approvals and certificates

    calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)

  • Pressure approvals and certificates

    CRN, PED, AD2000

  • Material certificates

    3.1 material (wetted parts)

Documents / Manuals / Software

Accessories / Spare parts

Nr
Order code
Specification